Livery Request & Exchange

[MenendezDiego 1]

Rename in aircraft.cfg IAF243 to IAF234... that,s the first thing that you have to check when a texture doesnt show up...Usual is an error in cfg.file...

I thought it,s common knowledge by now to add a texture from scratch..Fs98 to FSX ,it,s been more than ten years now..

Thx Dag ! Love the pakistani textures. Awesome job on the fuel tanks...i kinda use yours now..See them on the Michigan livery ?

James,if i,m not mistaken those are the default ones but i,m using REX so I think that may change all lights.

Thanks Yago...I'm sure it is common knowledge...but I just started this year with FSX so I'm still pretty new to everything

[yago9 0]

Thanks Yago...I'm sure it is common knowledge...but I just started this year with FSX so I'm still pretty new to everything

Exactly my point.. I wrongly assumed that everybody started the FS experience long time ago, my bad..It does sounds wrong what i said above but it wasnt meant that way.! Sry...I should pay more attention when editing aircraft.cfg file..Is it working now ?

[Geraki 10]

NEW HAF F-16C block52+ 001 Lockheed Martin.

http://s356.photobucket.com/albums/oo6/Vip...k-viper-002.jpg

[MenendezDiego 1]

No worries Yago. I appreciate the work you do. I got 4 of the new ones working, Just not the 234..no worries, I'm happy with what I've got

Now I only wish they'd make a CFT IAF two seater F-16!!! Now THAT would be awesome

[yago9 0]

Yes, a two seater would be nice i know.

[mikpen14 0]

Are the above on the sim-outhouse site already, or are they not yet available?

Fantastic work BTW!

[yago9 0]

Thx ! Not uploaded yet..I,ll do it for this week-end..Here,s some more..The red tape over the fuselage it,s from this photos, taken by me for repaint material at

the airshow in Michigan. Ok,i,ll try to stop now.ehh..,,Must...do...another...one...!!" I sure miss the dust excluders and covers..That would be so neat...

[JamesChams 108]

...

Mr. Yago9,

What can I say ...

I'll be downloading those too.

RE: the TAXI-Lights; Thanks!

(I'm getting REX SP1 when it's released. Right now, I use 3D-Lights REDUX and FEX/GEX/UTX (All versions)).

[Guest Dag]

Yago;

I hate to say this but that red tape, covering the "D" handle/wire cover, used to jettison the canopy will not be present in the air or when the aircraft is "alive". The tape is simply put on because of airshow static display where people are allowed to actually touch the aircraft. Imagine a smart arse showing his buddy how to open this rescue hatch, just because he know how and even taking it a step further to pull the handle/wire out 6 feet....

If a certain battery is not disconnected, you would have a lively "rocket motor show". So, that red tape is unrealistic with power on and is FOD above 30 kts, I would say.

Use the tank textures and all else, you have permission. DXT5 DDS off course :-) Are there FS36118 finished external fuel tanks in the US, and fuel pylons??

Thanks

[Aprilia 4 Ever 35]

No worries Yago. I appreciate the work you do. I got 4 of the new ones working, Just not the 234..no worries, I'm happy with what I've got

Now I only wish they'd make a CFT IAF two seater F-16!!! Now THAT would be awesome

there is a mistake in the aircraft.cfg, you have to change the title and texure line.

there are differenet numbers, in the aircraft.cfg it is 243 but it should be 234...so correct the lines and it will work.

[yago9 0]

Yago;

I hate to say this but that red tape, covering the "D" handle/wire cover, used to jettison the canopy will not be present in the air or when the aircraft is "alive". The tape is simply put on because of airshow static display where people are allowed to actually touch the aircraft. Imagine a smart arse showing his buddy how to open this rescue hatch, just because he know how and even taking it a step further to pull the handle/wire out 6 feet....

If a certain battery is not disconnected, you would have a lively "rocket motor show". So, that red tape is unrealistic with power on and is FOD above 30 kts, I would say.

Use the tank textures and all else, you have permission. DXT5 DDS off course :-) Are there FS36118 finished external fuel tanks in the US, and fuel pylons??

Thanks

Yea, kinda got the purpose of the tape, that,s why I was dreaming about dust excluders and covers..For me it,s equally important how a FS model looks parked. I do have special made textures for parked aircrafts as static objects made with AI Traffic tool as you can see in this shot.That didnt make it into the uploaded version . I have a way to trick the eye when the modeler leaves out stuff..The tail of the italian F-16 looks like this but it wasnt modelled this way.It,s a 3D painted illusion.

I will leave the tape out from the uploaded version then..Thx for the tanks again..

[JamesChams 108]

...For me it,s equally important how a FS model looks parked. I do have special made textures for parked aircrafts as static objects made with AI Traffic tool as you can see in this shot.That didnt make it into the uploaded version .

I couldn't agree more, Mr. Yago9! I hope that Mr. Dag and other developers will include those "extra's" in the next revision/update.

PS: Will you be uploading these other repaints along with the previous one mentioned this weekend?

Also, Mr. Yago9, would you consider doing repaints of these for the current CFT model?

(You can find more pic.'s on F16.net)

Thank you in advance!

[Guest Dag]

Yago;

Remember permission/copyrights when you paste photo stuff/extra layers on other people's work for upload.

What I said above may be rephrased to "you can do whatever you want to stores, pylons and common textures". For the external aircraft textures (my work) you need permission. I have seen too many apply a different tail number to my work and claim it their own complete work. This does not nessesarily apply to this project.

I am done for now making textures for the F-16, I may come back later but it seems a lot of stuff that I do simply gets edited and I take that as a signal that maybe the paints were not that good in the first place.

Thanks

[hjcurtis 7]

Is there any news on the Belgian AF 'Matrix' repaint:

Matrix F-16

please?

I know you guys are busy making superb repaints but this is one I'm particularly keen to see and I'm sure someone said they had it on their list.

Thanks!

[hjcurtis 7]

Yago;

Remember permission/copyrights when you paste photo stuff/extra layers on other people's work for upload.

What I said above may be rephrased to "you can do whatever you want to stores, pylons and common textures". For the external aircraft textures (my work) you need permission. I have seen too many apply a different tail number to my work and claim it their own complete work. This does not nessesarily apply to this project.

I am done for now making textures for the F-16, I may come back later but it seems a lot of stuff that I do simply gets edited and I take that as a signal that maybe the paints were not that good in the first place.

Thanks

Dag,

This is very sad news.

I for one don't have the skills that you possess for creating repaints but I have certainly downloaded and appreciated your efforts.

I hope you will reconsider.

I think your work is superb!

[Guest Dag]

Howard,

I thank you for your kind words.

I just think there are too many "editors" out there, insisting on fixing other people's work and too few "complete scheme" painters. I get a bit put off by that. I am on another project now, however, building a cabin by the sea.

[JamesChams 108]

...I am done for now making textures for the F-16, I may come back later but it seems a lot of stuff that I do simply gets edited and I take that as a signal that maybe the paints were not that good in the first place.

Mr. Dag,

I think your work was/is amazing! And, I do hope, you can add all the other stuff that was left out from the models (like FOD, chalks, etc.), later.

My only critism was for lack of functionality in the "buggy" HUD / MFD's and other instrument Gauges; the items left out for time, compatibility, and performance (FPS) issues - which, I don't believe the paints were ever in that category. Moreover, Mr. Finn / Mr. Scott have informed me that you all are working on other projects right now. That is why, I'm trying (real-hard) not to bother you'll too much with my requests for fixes, just right now.

I hope that your feelings weren't hurt by any comments made here - "We" like your work very much and want to see more.

[VinFlyer 8]

Is there any news on the Belgian AF 'Matrix' repaint:

Matrix F-16

please?

I know you guys are busy making superb repaints but this is one I'm particularly keen to see and I'm sure someone said they had it on their list.

Thanks!

Working on it, along with couple of other paints

[GR27 0]

No worries Yago. I appreciate the work you do. I got 4 of the new ones working, Just not the 234..no worries, I'm happy with what I've got

Now I only wish they'd make a CFT IAF two seater F-16!!! Now THAT would be awesome

It would be awesome, but unfortunately Aerosoft are not going to make a two seater F-16 (maybe they will), so i think it would be awesome if yago9 (or someone as talented as he is) would make a paint of a CFT IAF "SUFA" F-16I one seat to the CFT model that Aerosoft did make, i know it is not a real model but it sure will look great.

http://www.airliners.net/photo/Israel---Ai...-16I/1156139/L/

http://www.airliners.net/photo/Israel---Ai...-16I/1212428/L/

http://www.airliners.net/photo/Israel---Ai...-16I/1213286/L/

[yago9 0]

Wow ,someone got a bit cranky for no reason...Dag,let,s start with each issue..First I do not need any permission to use photos that i took myself,second there are applied over a texture made with a PAINT KIT that i paid for..ok?. If i modified one of your textures was for my personal use only...I,m way beyond the stage when i need ,,help" from another painter..I,ve downloaded ony two custom textures for the F-16,the pakistani and the italian AMI5th black,both yours. I did like your fuel tanks but i had no intention of using them with my uploads.Fact is i liked what you did with the bump file..You throwing some cheap punches at me and I dont understand why.Are you accusing me of plagiarism ? Did my work resemble any other? I doubt it.

I only tied to improve a good product for everyones pleasure., If Aerosoft has an issue with that, fine..I,m done sharing for any payware model ,so we have no more issues to discuss.

http://s15.photobucket.com/albums/a396/Aft...0FW%20Flagship/

[hjcurtis 7]

Working on it, along with couple of other paints

Can't wait!

Thanks very much for your efforts on this - it looks superb already.

[stovall 1]

Wow ,someone got a bit cranky for no reason...Dag,let,s start with each issue..First I do not need any permission to use photos that i took myself,second there are applied over a texture made with a PAINT KIT that i paid for..ok?. If i modified one of your textures was for my personal use only...I,m way beyond the stage when i need ,,help" from another painter..I,ve downloaded ony two custom textures for the F-16,the pakistani and the italian AMI5th black,both yours. I did like your fuel tanks but i had no intention of using them with my uploads.Fact is i liked what you did with the bump file..You throwing some cheap punches at me and I dont understand why.Are you accusing me of plagiarism ? Did my work resemble any other? I doubt it.

I only tied to improve a good product for everyones pleasure., If Aerosoft has an issue with that, fine..I,m done sharing for any payware model ,so we have no more issues to discuss.

http://s15.photobucket.com/albums/a396/Aft...0FW%20Flagship/

Yago, good reply to an uncalled for remark. From what I can see all of your work is original and much appreciated. I am quite sure Aerosoft is very glad to see your work and many other creations shared with the community. If not they would not have distributed the paint kit. I for one am looking forward to anything you created and will download as soon as it is available. Keep up the good work. One last thought, seeing what you do is an incentive for me to make myself better as a painter. Great stuff and thanks again.

Tom

[Guest Dag]

Well... I just meant the black AMI textures, to clarify, and if indeed the vertical fin base with the modified ADF type actuator were to be uploaded. Nothing else. If uploads of modifed textures were to be done, permission from the original texture maker should apply.

However, seeing the kind of general hostility/arrogance in the above two posts, convinced me. This is nothing for me and you are way better off without me.

Thanks

[stovall 1]

Well... I just meant the black AMI textures, to clarify, and if indeed the vertical fin base with the modified ADF type actuator were to be uploaded. Nothing else. If uploads of modifed textures were to be done, permission from the original texture maker should apply.

However, seeing the kind of general hostility/arrogance in the above two posts, convinced me. This is nothing for me and you are way better off without me.

Thanks

Always sorry to see someone with talent say they are leaving but Dag it is your call. Hope you reconsider and share your talents with the community. Yago has produced some quality original paints that really have nothing to do with your work. Hope we can keep things on an upbeat basis.

Tom

[Guest Dag]

Yago has produced some quality original paints that really have nothing to do with your work.

I am fully aware of that